The Mantis Kit for the Corvette C5/C6 is the most relevant angle kit in today's drift society, and here's why,
-Angle,65 degrees+ depending on your wheel setup and length of control arms
-Tierods Outer tierods included, these fasten to the stock inner tierods
-Ackerman, adjustable ackerman ranging from +4 degrees to 0
-Roll Center, optimized handling by adding 20mm of roll center correction
-Bump steer, minimal bump steer in drift by perfecting tierod pitch angle
-Caster, added trail and reduced caster which adds more grip by increasing tire contact patch, causes less bump steer, less jacking from lock to lock, increase transition speed, effortless transition while on throttle
-Camber, optimized camber ranging from -3 to -6
-Track Width,25-75mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceable
-Weight Reduction,compact drop knuckle design makes for a light wieght and strong design, 2024 aluminum used where possible which provides steel like strength at 40% weight reduction.
Please allow 2-3weeks of fabrication before the item is sent.