The Mega Mantis Kit for the 350z/g35 is the most relevant angle kit in today's drift society, and here's why,
-Angle, 70 degrees depending on your steering rack/offset rack setup
-Ackerman, adjustable ackerman
-Roll Center, optimized handling by adding 50mm of roll center correction
-Bump steer, minimal bump steer in drift by perfecting tierod pitch angle
-Caster, added trail and reduced caster which adds more grip by increasing tire contact patch, causes less bump steer, less jacking from lock to lock, increase transition speed, effortless transition while on throttle
-Camber, optimized camber ranging from -3 to -6
-Track Width, 50-75mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceable
-Weight Reduction, compact drop knuckle design makes for a lighter and stronger design, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 2024 aluminum used where possible which provides steel like strength at 40% weight reduction.
The kit includes everything you need to install
-2 lower control arms
-2 compression arms
-2 upper control arms
- 2 inner and outer tierods
-all bearings and hardware required for install.
For custom colors, email your order number and the color wanted
Please allow 2-3weeks of fabrication before the item is sent.